Home › Vehicle Exterior › WINDOW / GLASS › WINDSHIELD GLASS
RM37H0E _59 Vehicle Exterior _095305 WINDOW / GLASS _0448200 WINDSHIELD GLASS G

WINDOW / GLASS  WINDSHIELD GLASS  INSPECTION  


PROCEDURE

Hide 56111 1.INSPECT WINDSHIELD GLASS (for Cold Area)

a.

Inspect the windshield glass.

i.
B563188C05
1.5,0.25 1.917,0.417 0.417,0.167 1.229,1.521 1.531,1.198 true 2.281,1.542 1.906,1.208 true 0.115,0.135 0.427,0.292 0.313,0.156 10 false *a 1.135,1.542 1.292,1.698 0.156,0.156 10 false B 2.313,1.563 2.469,1.719 0.156,0.156 10 false E 1.604,0.271 2.063,0.469 0.458,0.198 10 false A45
*a Component without harness connected
Windshield Glass)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(A45)Location & Routing

Click Connector(A45)Engine Compartment>Front Compartment Main Wire / No. 3 Front Compartment Wire / No. 4 Front Compartment Wire>Front Wiper Deicer (Windshield Glass)

A45-1(B) - A45-2(E) 23°C 1.75 to 2.15 Ω


If the result is not as specified, replace the windshield glass.