According to the display on the GTS, read the "Data List".
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| Telematics Activation Status | DCM activation status | Shipping or Active | Shipping: Not activated
Active: Activated |
- |
| Tester Display |
|---|
| Telematics Activation Status |
Check if the flag information indicates "Active" as shown in the illustration.
| Result | Proceed to |
|---|---|
| "Shipping" is indicated. | A |
| "Active" is indicated. | B |
A
B
Perform the contract procedure again.
Perform the contract procedure again.
Click hereAudio / Visual / Telematics>TELEMATICS>TELEMATICS SYSTEM (for TOYOTA Connect)>REGISTRATION
Check for the problem symptom.
| Result | Proceed to |
|---|---|
| System returns to normal. | A |
| System does not return to normal. | B |
A
B
Perform "Download necessary data" again.
Click hereAudio / Visual / Telematics>TELEMATICS>TELEMATICS SYSTEM (for TOYOTA Connect)>INITIALIZATION
Check if the problem symptom recurs.
| Result | Proceed to |
|---|---|
| System returns to normal. | A |
| Problem symptom recurs. | B |
A
B