OCCUPANT DETECTION ECU
| Terminal No. (Symbol) | Terminal Description | Condition | Specified Condition |
|---|---|---|---|
| L19-1 - L19-5 | Front occupant classification sensor LH power supply | Ignition switch ON | 11 to 14 V |
| L19-2 - L19-6 | Rear occupant classification sensor LH power supply | Ignition switch ON | 11 to 14 V |
| L19-3 - L19-5 | Front occupant classification sensor LH signal | Ignition switch ON | Pulse generation |
| L19-4 - L19-6 | Rear occupant classification sensor LH signal | Ignition switch ON | Pulse generation |
| L19-5 - L20-10 | Front occupant classification sensor LH ground | Always | Below 1 V |
| L19-6 - L20-10 | Rear occupant classification sensor LH ground | Always | Below 1 V |
| L20-4 - L20-10 | CAN communication line | Ignition switch ON | Pulse generation |
| L20-5 - L20-10 | CAN communication line | Ignition switch ON | Pulse generation |
| L20-6 - L20-10 | Power source | Ignition switch ON | 11 to 14 V |
| L20-7 - L20-9 | Front passenger side buckle switch signal | Always | Pulse generation |
| L20-9 - L20-10 | Front passenger side buckle switch ground | Always | Below 1 V |
| L20-10 - Body ground | Ground | Always | Below 1 V |