The occupant detection ECU sends/receives signals to/from each ECU via CAN communication.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | DTC Output from | Priority |
|---|---|---|---|---|---|
| U0125 | Lost Communication with Multi-axis Acceleration Sensor Module | CAN communication error between the occupant detection ECU and airbag ECU assembly (CAN communication system malfunction) | CAN communication system | Occupant Detection | B |
| U0129 | Lost Communication with Brake System Control Module | CAN communication error between the occupant detection ECU and brake actuator assembly (No. 2 skid control ECU assembly) (CAN communication system malfunction) | CAN communication system | Occupant Detection | B |
Refer to troubleshooting in CAN Communication System.
Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING
Go to CAN communication system.
Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING
| Proceed to |
|---|
| NEXT |
NEXT