85531A
1.INSPECT NO. 2 POWER OUTLET SOCKET
| *a | Front view of No. 2 power outlet socket
(No. 2 Power Outlet Socket) |
| *b | Component without harness connected
(No. 2 Power Outlet Socket) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
|
Click Location & Routing(G159)Location & Routingewd_type=routing;type=c;code=G159 Click Connector(G159)Body>Floor Wire / No. 3 Floor Wire>No. 2 Power Outlet Socketewd_type=component;type=c;code=G159;pinno=2,1,4 |
||
| A - G159-2 (ACC3) | Always | Below 1 Ω |
| B - G159-1 (ACC4) | Always | Below 1 Ω |
| C - G159-4 (E) | Always | Below 1 Ω |
| D - G159-2 (ACC3) | Always | Below 1 Ω |
| E - G159-1 (ACC4) | Always | Below 1 Ω |
| G159-1 (ACC4) - G159-2 (ACC3) | Always | 10 kΩ or higher |
If the result is not as specified, replace the No. 2 power outlet socket.