Home › Vehicle Interior › SEAT › REAR SEAT REMINDER SYSTEM › from 2021.08
RM37H0E _58 Vehicle Interior _095292 SEAT _0497420 REAR SEAT REMINDER SYSTEM D

SEAT  REAR SEAT REMINDER SYSTEM  OPERATION CHECK  


CHECK BASIC OPERATIONS


NOTICE:

Using the multi-information display built into the combination meter assembly, check that the rear seat reminder function is set to ON.

Click hereVehicle Interior>SEAT>REAR SEAT REMINDER SYSTEM>CUSTOMIZE PARAMETERS


HINT:
·

Use the same procedure as for the RH side.

·

If a higher priority notification is displayed on the multi-information display, the rear seat reminder will not be displayed.



a.

Operation Check 1:

i.

Turn the ignition switch off.


ii.

Open the rear door LH for 2 seconds or more.

HINT:

If a lock operation is performed using the wireless door lock function or entry function after opening and closing the door, the rear seat reminder is not displayed.



iii.

Close the rear door LH.


iv.

Start the hybrid control system within 10 minutes.


v.

Turn the ignition switch off, and then check that a rear seat reminder message is displayed on the multi-information display.



b.

Operation Check 2:

i.

Start the hybrid control system.


ii.

Open the rear door LH for 2 seconds or more.


iii.

Close the rear door LH.


iv.

Turn the ignition switch off, and then check that a rear seat reminder message is displayed on the multi-information display.