Home › BODY ELECTRICAL › NAVIGATION › NAVIGATION SYSTEM

NAVIGATION SYSTEM > Map Disc Read Error

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK MAP DISC


    I100201
  1. Check for dirt on the map disc surface.

    OK:
    No dirt is on the map disc surface.

NOTICE:
Do not use a conventional record cleaner or anti-static preservative.

HINT:
If the disc is dirty, clean the disc by wiping the disc surface radially with a soft cloth.



NG
CLEAN MAP DISC
OK


2.CHECK MAP DISC


    I100152
  1. Check that the map disc is not deformed or cracked.

    OK:
    No deformations or cracks appear on the map disc.



NG
REPLACE MAP DISC
OK

PROCEED TO NEXT INSPECTION PROCEDURE SHOWN IN PROBLEM SYMPTOMS TABLE