AIRBAG SYSTEM > TC and CG Terminal Circuit |

| 1.CHECK WIRE HARNESS (DLC3 - CENTER AIRBAG SENSOR AND BODY GROUND) |
![]() |
Disconnect the A18 sensor connector.
Measure the resistance of the wire harness side connectors.
| Tester Connection | Specified Condition |
| D1-13 (TC) - A18-15 (TC) | Below 1 Ω |
| D1-4 (CG) - Body ground | Below 1 Ω |
| A18-15 (TC) - Body ground | 1 MΩ or higher |
|
| ||||
| OK | ||
| ||