BODY > GENERAL MAINTENANCE |
| 1. TIGHTEN BOLTS AND NUTS |
Tighten the bolts and nuts on the chassis parts listed below, if necessary.
Tighten the bolts and nuts on the body parts listed below, if necessary.
| 2. REPLACE AIR CONDITIONING FILTER |
Remove the glove compartment assembly.
Remove the filter case from the filter outlet.
Remove the filter from the filter case.
Replace the filter with a new one.
Installation is in the reverse order.
| 3. ROAD TEST |
Check the engine and chassis for abnormal noises.
Check that the vehicle does not wander or pull to one side.
Check that the brakes work properly and do not drag.
Do setting of the parking brake shoes.
| 4. BODY INSPECTION |
Check the body exterior for dents, scratches and rust.
Check the underbody for rust and damage.
If necessary, replace or repair.
| 5. FINAL INSPECTION |
Check the operation of the body parts.
Hood
Front and rear doors
Back door
Seats
Be sure to deliver a clean car. Especially check.