Home › RESTRAINTS › SUPPLEMENTAL RESTRAINT SYSTEM › OCCUPANT CLASSIFICATION ECU

OCCUPANT CLASSIFICATION ECU > REMOVAL

for Preparation Click here



1. PRECAUTION

CAUTION:
Be sure to read "PRECAUTION" thoroughly before servicing (Click here).



2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Work must be started at least 90 seconds after the power switch is turned off and after the cable is disconnected from the negative (-) battery terminal.



3. REMOVE FRONT RH SEAT ASSEMBLY

HINT:
Refer to the procedures up to "REMOVE FRONT SEAT ASSEMBLY" (Click here).



4. REMOVE OCCUPANT CLASSIFICATION ECU


    C148111E01
  1. Disconnect the connectors from the occupant classification ECU.

  1. Using a screwdriver, remove the occupant classification ECU.