Home › BODY ELECTRICAL › NAVIGATION › NAVIGATION SYSTEM

DTC    58-42    Map Disc Read Error

DTC    80-42    Map Disc Read Error

for Preparation Click here


DESCRIPTION


DTC No.
DTC Detection Condition
Trouble Area
58-42
When one of following conditions is met:
  1. Player error
  2. Scratches or dirt on disc
  3. Access to invalid address due to software error
  1. Map disc
  1. Navigation ECU
80-42
When one of following conditions is met:
  1. Player error
  2. Scratches or dirt on disc
  3. Access to invalid address due to software error

INSPECTION PROCEDURE

HINT:
After the inspection is completed, clear the DTCs.

1.CHECK MAP DISC


    I100152
  1. Check that the map disc is not deformed or cracked.

    OK:
    No deformations or cracks on the map disc.



NG
Go to step 4
OK


2.DISC CLEANING


    I100201E04
  1. If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

    NOTICE:
    Do not use a conventional record cleaner or anti-static preservative.


NEXT


3.DTC CLEAR AND RECHECK
  1. Clear the DTCs (Click here).

  1. Recheck for DTCs and check if the same trouble occurs again.

    OK:
    Same problem does not occur.



OK
END
NG


4.REPLACE MAP DISC
  1. Replace the map disc.

  1. Clear the DTCs and recheck for DTCs.

  1. Check if the same trouble occurs again.

    OK:
    Same problem does not occur.



OK
END
NG

REPLACE NAVIGATION ECU