Home › BODY ELECTRICAL › HORN › LOW PITCHED HORN

LOW PITCHED HORN > INSTALLATION

for Preparation Click here



1. INSTALL LOW PITCHED HORN


B127786E01
  1. Place the stay onto the baffle part of the radiator support upper, and then install the horn with the bolt.

    Torque:
    20 N*m{ 204 kgf*cm , 15 ft.*lbf }

    NOTICE:
    Do not overlap the horn and the protruding part of the radiator support.

  1. Connect the horn connector.



2. INSTALL FRONT BUMPER COVER


    B132997E01
  1. Put protective tape under the front fender.

  1. w/ Fog light:
    Connect the 2 fog light connectors.

  1. Attach the 12 claws to install the bumper cover.

  1. Install the 4 screws and 3 clips.

  1. Install the 2 radiator grille protectors.

    Torque:
    5.0 N*m{ 51 kgf*cm , 44 in.*lbf }