DRIVE BELT > ON-VEHICLE INSPECTION |
| 1. CHECK DRIVE BELT TENSION |
![]() |
Using a belt tension gauge, measure the belt tension.
Belt tension gauge:
DENSO BTG-20 (95506-00020)
Borroughs No. BT-33-73F
| Item | Specified Condition |
| New belt | 99 to 121 lbf |
| Used belt | 55 to 77lbf |
![]() |
Reference:
Check the drive belt deflection.
![]() |
When not using a belt tension gauge, measure the belt deflection.
Pressing force: 98 N (10 kgf, 22 lbf)
| Item | Specified Condition |
| New belt | 9.0 to 12.0 mm (0.35 to 0.47 in.) |
| Used belt | 11 to 15 mm (0.43 to 0.59 in.) |