Home › RESTRAINTS › SEAT BELT › REAR SEAT INNER BELT ASSEMBLY

REAR SEAT INNER BELT ASSEMBLY > REMOVAL

for Preparation Click here



1. REMOVE REAR SEAT CUSHION ASSEMBLY


    B132600E01
  1. Detach the seat cushion's 2 front hooks from the vehicle body.

    NOTICE:
    Follow the instructions below carefully as the cushion frame deforms easily.


    1. Choose a hook to detach first. Place your hands near the hook as shown in the illustration. Then lift the seat cushion to detach the hook.

    2. Repeat for the other hook.

  1. Detach the seat cushion's rear hook.

  1. Remove the seat cushion.



2. DISCONNECT REAR SEAT BELT ASSEMBLY OUTER CENTER (for Floor Anchor)


B076014E04
  1. Remove the bolt and floor anchor part of the seat belt outer.



3. REMOVE REAR SEAT INNER BELT ASSEMBLY RH


    B074539E03
  1. Remove the bolt and rear seat inner belt.



4. REMOVE REAR SEAT INNER BELT ASSEMBLY CENTER


B074540E02
  1. Remove the bolt and rear seat inner belt.



5. REMOVE CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY LH
  1. Remove the 2 bolts and anchor bracket.



6. REMOVE CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY RH
  1. Remove the 2 bolts and anchor bracket.