Home › BODY › EXTERIOR › FRONT BUMPER

FRONT BUMPER > DISASSEMBLY

for Preparation Click here



1. REMOVE FRONT BUMPER MOULDING


    B073580E01
  1. Remove the 4 screws.

  1. Using a screwdriver, detach the 4 claws and remove the moulding.

    HINT:
    Tape the screwdriver tip before use.



2. REMOVE LOWER RADIATOR GRILLE LH


    B073577E01
  1. Using a screwdriver, detach the 4 claws and remove the grille.

    HINT:
    Tape the screwdriver tip before use.



3. REMOVE LOWER RADIATOR GRILLE RH

HINT:
Use the same procedure described for the LH side.



4. REMOVE FOG LIGHT UNIT LH (w/ Fog Light)


    E074103E02
  1. Detach the 3 claws and push the fog light unit towards the front of the vehicle.

  1. Remove the fog light bulb from the fog light unit.



5. REMOVE FOG LIGHT UNIT RH (w/ Fog Light)

HINT:
Use the same procedure described for the LH side.



6. REMOVE RADIATOR GRILLE


    B073578E03
  1. Using a screwdriver, detach the 12 claws and remove the grille.

    HINT:
    Tape the screwdriver tip before use.



7. REMOVE FRONT TURN SIGNAL LIGHT MOUNTING BRACKET RH
  1. Using a screwdriver, detach the claws and remove the mounting bracket.

    HINT:
    Tape the screwdriver tip before use.



8. REMOVE FRONT BUMPER EXTENSION MOUNTING BRACKET
  1. Remove the 2 screws and mounting bracket.