Home › BODY › EXTERIOR › BACK DOOR OUTSIDE GARNISH

BACK DOOR OUTSIDE GARNISH > INSTALLATION

for Preparation Click here



1. INSTALL BACK DOOR OUTSIDE GARNISH


    B067629E01
  1. Install the back door opener switch to the garnish with the 2 screws.



  1. Attach the 2 clips to install the garnish.


    B133842E01

  1. Install the 4 nuts.

  1. Connect the back door opener switch connector.



2. INSTALL BACK DOOR LOWER TRIM BOARD ASSEMBLY


B075175E04
  1. Attach the 11 clips to install the lower trim board.



3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL


4. PERFORM INITIALIZATION
  1. Perform initialization (Click here).

    NOTICE:
    Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.