REAR SEAT OUTER BELT ASSEMBLY > INSPECTION |
| 1. INSPECT REAR SEAT OUTER BELT ASSEMBLY CENTER |
![]() |
When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is over 45°, check that the belt locks.
If the operation is not as specified, replace the belt.
| 2. INSPECT REAR SEAT OUTER BELT ASSEMBLY |
![]() |
When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is over 45°, check that the belt locks.
If the operation is not as specified, replace the belt.