Home › RESTRAINTS › SUPPLEMENTAL RESTRAINT SYSTEM › FRONT AIRBAG SENSOR

FRONT AIRBAG SENSOR > REMOVAL

for Preparation Click here


CAUTION:
Be sure to read the precautionary notices concerning the SRS airbag system before servicing it (Click here).



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.



2. REMOVE ENGINE UNDER COVER LH


3. REMOVE ENGINE UNDER COVER RH


4. REMOVE FRONT AIRBAG SENSOR LH


H043786E02
  1. Disconnect the sensor connector.

  1. Remove the 2 bolts and sensor.



5. REMOVE FRONT AIRBAG SENSOR RH


C127028
  1. Disconnect the sensor connector.

  1. Remove the 2 bolts and sensor.