Home › BODY › MIRROR › MIRROR HEATER RELAY

MIRROR HEATER RELAY > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT MIRROR HEATER RELAY
  1. Remove the mirror heater relay.



    B060778E04
  1. Measure the resistance of the relay.

    Standard resistance:
    Tester Connection
    Specified Condition
    3 - 5
    10 kΩ or higher
    Below 1 Ω
    (when battery voltage is applied to terminals 1 and 2)

    If the result is not as specified, replace the relay.

  1. Install the mirror heater relay.