Home › HYBRID SYSTEM › P112 HYBRID VEHICLE CONTROL › HYBRID CONTROL SYSTEM

DTC    P0A1D-390    Hybrid Powertrain Control Module

for Preparation Click here


DESCRIPTION

The HV control ECU performs self-checks to detect an internal operating malfunction in the ECU.

DTC No.
INF Code
DTC Detection Condition
Trouble Area
P0A1D
390
Charge control malfunction
  1. HV control ECU

INSPECTION PROCEDURE

1.READ OUTPUT DTC (HV ECU)
  1. Connect the Techstream to the DLC3.

  1. Turn the power switch ON (IG).

  1. Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.

  1. Check if DTCs are output.

    Result:
    DTC P0A1D (INF 390) and other DTCs are output

    HINT:
    If any other codes besides P0A1D (INF 390) are output, perform troubleshooting for those DTCs first.



YES
GO TO RELEVANT DTC CHART
NO

REPLACE HYBRID VEHICLE CONTROL ECU