Home › HYBRID SYSTEM › P112 HYBRID VEHICLE CONTROL › HYBRID CONTROL SYSTEM

DTC    P0A37-260    Generator Temperature Sensor Circuit Range / Performance

for Preparation Click here


DESCRIPTION

Refer to DTC P0A38 (INF 257) .

DTC No.
INF Code
DTC Detection Condition
Trouble Area
P0A37
260
No. 2 motor temperature sensor performance problem
  1. Hybrid vehicle motor
  2. Transaxle fluid leakage
  3. HV transaxle assembly

INSPECTION PROCEDURE

1.CHECK TRANSAXLE FLUID LEVEL
  1. Check if the transaxle is filled with fluid to the specified level.

    OK:
    The transaxle is filled with fluid to the specified level

    HINT:
    The No. 2 motor temperature sensor is unavailable as an individual service part. Therefore, when replacing it, the hybrid vehicle motor must be replaced.



NG
REPAIR OIL LEAKAGE, OR REPLACE HYBRID VEHICLE TRANSAXLE
OK

REPLACE HYBRID VEHICLE MOTOR ASSEMBLY