Home › HYBRID SYSTEM › P112 HYBRID BATTERY CONTROL › HYBRID BATTERY SYSTEM

DTC    P0A1F    Battery Energy Control Module

for Preparation Click here


DESCRIPTION

For the purpose of calculating the SOC (state of charge) of the HV battery and ensuring safety in the event of a malfunction in the HV battery assembly, the battery ECU provides the following control functions:
  1. SOC calculation
    The battery ECU calculates the SOC by estimating the charging and discharging amperage and monitoring other values.
  2. Cooling fan control
    The battery ECU controls the battery blower in order to protect the HV battery assembly from heat that is generated during charging and discharging. By maintaining a stable temperature, it promotes the effective operation of the HV battery assembly.
  3. HV battery assembly malfunction monitoring
    If the battery ECU detects a malfunction, it protects the HV battery assembly by limiting or stopping the charging or discharging of the HV battery in accordance with the temperature or voltage of the HV battery assembly.

DTC No.
DTC Detection Condition
Trouble Area
P0A1F
Battery ECU internal error (1 trip detection logic)
Battery ECU

MONITOR DESCRIPTION

If the battery ECU detects an internal malfunction in the ECU itself, it illuminates the MIL and sets a DTC.

MONITOR STRATEGY


Related DTCs
P0A1F: Battery ECU/Rationality
Required sensors/components
Battery ECU
Frequency of operation
Continuous
Duration
TOYOTA's intellectual property
MIL operation
Immediate or 1 driving cycle or 2 driving cycles
Sequence of operation
None

TYPICAL ENABLING CONDITIONS


The monitor will run whenever the following DTCs are not present
TOYOTA's intellectual property
Other conditions belong to TOYOTA's intellectual property
-

TYPICAL MALFUNCTION THRESHOLDS


Battery ECU
Abnormal

COMPONENT OPERATING RANGE


Battery ECU
DTC P0A1F is not detected

INSPECTION PROCEDURE

1.REPLACE BATTERY ECU

NEXT

COMPLETED