Home › SECURITIES › ENGINE IMMOBILISER › ENGINE IMMOBILISER SYSTEM (w/o Smart Key System)

ENGINE IMMOBILISER SYSTEM (w/o Smart Key System) > PRECAUTION

for Preparation Click here



NOTICE:
For initialization:
When disconnecting the cable from the negative (-) battery terminal, initialize the following system after the cable is reconnected.

System Name
See procedure
Power Window Control System
Click here
For hybrid system activation:
  1. When the warning light is illuminated or the battery has been disconnected and reconnected, pressing the power switch may not start the system on the first try. If so, press the power switch again.
  2. If the power switch is ON (IG), the battery is disconnected, and the key is not in the key slot or not within the key detection area during reconnection, DTC B2799 (Click here) may be output.