Home › SECURITIES › ENGINE IMMOBILISER › ENGINE IMMOBILISER SYSTEM (w/o Smart Key System)

DTC    B2795    Unmatched Key Code

for Preparation Click here


DESCRIPTION

This DTC is output when a key with a key code that has not been registered in the ECU is inserted into the key slot.

DTC No.
DTC Detection Condition
Trouble Area
B2795
Key with unregistered code is inserted
Key (door control transmitter)

INSPECTION PROCEDURE

1.REREGISTER KEY
  1. Delete the DTC (Click here).

  1. Reregister the key (which caused this DTC to be output) with the transponder key ECU (Click here).

  1. Insert the same key into the key slot.

  1. Check that the power switch can be turned ON (ACC and IG) and the hybrid control system can be started.

    OK:
    Power switch can be turned (ACC and IG) and hybrid control system can be started.



NG
REPLACE KEY
OK

END