Home › HYBRID SYSTEM › P112 HYBRID VEHICLE CONTROL › HYBRID CONTROL SYSTEM

DTC    P3108-594    A/C Amplifier Communication Circuit Malfunction

for Preparation Click here


DESCRIPTION

HINT:
DTC P3108 (INF 594) is one of the DTCs that indicate CAN communication malfunction.
Since the air conditioning amplifier is connected to BEAN (Body Electronics Area Network), the HV control ECU communicates with it using CAN (Controller Area Network) communication via the gateway ECU.


DTC No.
INF Code
DTC Detection Condition
Trouble Area
P3108
594
CAN communication malfunction
  1. CAN communication

INSPECTION PROCEDURE

1.READ OUTPUT DTC (CODES ALL)
  1. Connect the Techstream to the DLC3.

  1. Turn the power switch ON (IG).

  1. Enter the following menus: Utility / All Codes.

  1. Read and record CAN communication malfunction DTCs.

    HINT:
    When DTCs other than CAN communication malfunction DTCs are output simultaneously, first correct the CAN communication problem, and then perform troubleshooting for other DTCs.


NEXT

GO TO CAN COMMUNICATION SYSTEM