Home › HYBRID SYSTEM › P112 HYBRID VEHICLE CONTROL › HYBRID CONTROL SYSTEM

DTC    P0A1D-177    Hybrid Powertrain Control Module

DTC    P0A1D-178    Hybrid Powertrain Control Module

DTC    P0A1D-392    Hybrid Powertrain Control Module

DTC    P0A1D-567    Hybrid Powertrain Control Module

for Preparation Click here


DESCRIPTION

The HV control ECU performs self-checks to detect an internal operating malfunction in the ECU.

DTC No.
INF Code
DTC Detection Condition
Trouble Area
P0A1D
177
178
392
567
HV control ECU internal error
  1. HV control ECU

MONITOR DESCRIPTION

The HV control ECU performs many diagnostic tests to verify proper operation of internal and external ECU systems. In one of these diagnostics, the HV control ECU checks the result of the motor main CPU self-test.
If the HV control ECU detects a "Fail" from the motor main CPU self-test, it will conclude that there is an internal malfunction in the motor main CPU. The HV control ECU will illuminate the MIL and set a DTC.

MONITOR STRATEGY


Related DTCs
P0A1D (INF 177 / 178 / 392 / 567):
Motor main CPU malfunction
Required sensor / components
Hybrid vehicle control ECU
Frequency of operation
Continuous
Duration
TOYOTA's intellectual property
MIL operation
1 driving cycle
Sequence of operation
None

TYPICAL ENABLING CONDITIONS


The monitor will run whenever the following DTCs are not present
TOYOTA's intellectual property
Other conditions belong to TOYOTA's intellectual property
-

TYPICAL MALFUNCTION THRESHOLDS


Hybrid vehicle control ECU
Internal error

COMPONENT OPERATING RANGE


Hybrid vehicle control ECU
DTC P0A1D (INF 177 / 178 / 392 / 567) is not detected

INSPECTION PROCEDURE

If any of the above information (INF) codes are present, replace the HV control ECU.
1.REPLACE HYBRID VEHICLE CONTROL ECU
  1. Replace the hybrid vehicle control ECU .


NEXT

COMPLETED