Home › BODY ELECTRICAL › METER › METER / GAUGE SYSTEM

METER / GAUGE SYSTEM > TERMINALS OF ECU

for Preparation Click here



CHECK COMBINATION METER (METER ECU)

I040067E01


Symbols (Terminals No.)
Wiring Color
Terminal Description
Condition
Specified Condition
km/h or mph (C10-1) - Body ground
L - Body ground
km/h or mph signal
Power switch ON (ACC or IG) and km/h or mph switch ON
Below 1 V
Power switch ON (ACC or IG) and km/h or mph switch OFF
4 to 5.5 V
TRIP EARTH (C10-2) - Body ground
B - Body ground
GND signal FOR ODO/ TRIP SWITCH
Always
Below 1 Ω
ODO/TRIP/RESET (C10-3) - Body ground
Y - Body ground
ODO/TRIP/RESET signal
ODO/TRIP/RESET switch ON
Below 1 V
ODO/TRIP/RESET switch OFF
4 to 5.5 V
IG2 (C10-4) - Body ground
O - Body ground
Power switch signal
Power switch ON
10 to 14 V
Power switch OFF
Below 1 V
D-BELT SW (C10-6) - Body ground
LG - Body ground
Driver seat belt condition
D-BELT indicator light ON (IG)
Below 1 V
D-BELT indicator light OFF
10 to 14 V
P-BELT SW (C10-7) - Body ground
R - Body ground
Passenger seat belt condition
P-BELT indicator light ON
Below 1 V
P-BELT indicator light OFF
10 to 14 V
SECURITY (C10-8) - Body ground
R - Body ground
SECURITY signal
Key is not inserted
10 to 14 V
Key is inserted
Below 1 V
SPEED IN (C10-9) - Body ground
V - Body ground
Speed signal (Input)
Power switch ON (ACC or IG) and turn the wheel slowly
Pulse generation
(See waveform 1)
AUTO LVL (C10-10) - Body ground
L - Body ground
Headlight automatic leveling signal
Headlight leveling system is normal
Below 1 V
Headlight leveling system is malfunctioning
10 to 14 V
AIRBAG (C10-11) - Body ground
B - Body ground
AIRBAG signal
AIRBAG indicator light ON
Below 1 V
AIRBAG indicator light OFF
8 to 14 V
TEMP SSR- (C10-12) - Body ground
L - Body ground
Outside temperature signal
Always
4 to 5.5 V
4P OUT (C10-13) - Body ground
V - Body ground
Speed signal (Output)
Power switch ON (ACC or IG) and turn the wheel slowly
Pulse generation
(See waveform 2)
SIGNAL EARTH (C10-14) - Body ground
BR - Body ground
GND signal
Always
Below 1 Ω
FUEL IN (C10-15) - Body ground
B - Body ground
Fuel signal
Power switch ON (ACC or IG) and fuel level is FULL
4.0 Ω
Power switch ON (ACC or IG) and fuel level is EMPTY
110 Ω
TURN R (C10-18) - Body ground
G - Body ground
Turn signal right
Turn signal RH indicator light OFF
Below 1 V
Turn signal RH indicator light ON
10 to 14 V
TURN L (C10-19) - Body ground
Y - Body ground
Turn signal left
Turn signal LH indicator light OFF
Below 1 V
Turn signal LH indicator light ON
10 to 14 V
TEMP SSR+ (C10-20) - Body ground
R - Body ground
GND
Always
Below 1 Ω
+B (C10-21) - Body ground
Y - Body ground
Power switch signal
Always
10 to 14 V
IG2 (C10-22) - Body ground
V - Body ground
Power switch signal
Power switch ON (IG)
10 to 14 V
Power switch OFF
Below 1 V
BACK-UP LP (C10-23) - Body ground
P - Body ground
Back-up light signal
Power switch ON (ACC or IG) and shift is except R position
Below 1 V
Power switch ON (ACC or IG) and shift is R position
10 to 14 V
CHECK E/G (C10-26) - Body ground
G - Body ground
MIL signal
Power switch ON (ACC or IG) and MIL on
Below 1 V
Power switch ON (ACC or IG) and MIL off
10 to 14 V
TC (C10-28) - Body ground
SB - Body ground
Tail cancel (light condition) signal
Power switch ON (ACC or IG)
Pulse generation
(See waveform 3)
TR (C10-29) - Body ground
R - Body ground
Rheostat (light control) signal
Light control dimmer switch is OFF
Below 1 V
Light control dimmer switch is TAIL / HEAD
10 to 14 V
P-BELT LP (C10-30) - Body ground
Y - Body ground
Passenger seat belt signal
Power switch ON (ACC or IG) and sit on passenger seat, seat belt unfastened
Below 1 V
Power switch ON (ACC or IG) and sit on passenger seat, seat belt fastened
10 to 14 V
FUEL EARTH (C10-31) - Body ground
BR - Body ground
GND for fuel sender gauge
Always
Below 1 V


    A005135E24
  1. Using an oscilloscope, check the signal waveform 1 of the meter.
    Waveform 1 (Reference) 
    Item
    Contents
    Symbols (Terminal No.)
    SPEED IN (C10-9) - Body ground
    Tool setting
    5 V/DIV., 20 msec./DIV.
    Vehicle condition
    Driving at approx. 20 km/h (12 mph)

    HINT:
    As vehicle speed increases, the wavelength shortens.



  2. A005138E17
  3. Using an oscilloscope, check the signal waveform 2 of the meter.
    Waveform 2 (Reference) 
    Item
    Contents
    Symbols (Terminal No.)
    4P OUT (C10-13) - Body ground
    Tool setting
    5 V/DIV., 10 msec./DIV.
    Vehicle condition
    Engine idle speed

    HINT:
    As vehicle speed increases, the wavelength shortens.



  4. E065322E02
  5. Using an oscilloscope, check the signal waveform 3 of the meter.
    Waveform 3 (Reference) 
    Item
    Contents
    Symbols (Terminal No.)
    TC (C10-28) - Body ground
    Tool setting
    2 V/DIV., 1 msec./DIV.
    Vehicle condition
    Power switch ON (IG)

    HINT:
    Waveform changes as illumination dims ("A" becomes longer).


CHECK SUB WIRE HARNESS CONNECTOR

I040694E01


I040695E01


Symbols (Terminals No.)
Wiring Color
Terminal Description
Condition
Specified Condition
SECURITY (A-1) - Body ground
G - Body ground
SECURITY signal
Key is inserted
Below 1 V
Key is not inserted
10 to 14 V
D-BELT SW (A-3) - Body ground
R - Body ground
Driver seat belt condition
D-BELT indicator light ON
Below 1 V
D-BELT indicator light OFF
10 to 14 V
SIGNAL EARTH (A-4) - Body ground
G - Body ground
GND signal
Always
Below 1 Ω
TRIP EARTH (A-5) - Body ground
Y - Body ground
GND signal FOR ODO/ TRIP SWITCH
km/h or mph (A-6) - Body ground
V - Body ground
km/h or mph signal
Power switch ON (ACC or IG) and km/h or mph switch ON
Below 1 V
Power switch ON (ACC or IG) and km/h or mph switch OFF
4 to 5.5 V
IG2 (A-7) - Body ground
L - Body ground
Power switch signal
Power switch ON (IG)
10 to 14 V
Power switch OFF
Below 1 V
ODO/TRIP/RESET (A-8) - Body ground
GR - Body ground
ODO/TRIP/RESET signal
ODO/TRIP/RESET switch ON
Below 1 V
ODO/TRIP/RESET switch OFF
4 to 5.5 V
SPEED IN (A-10) - Body ground
Y - Body ground
Speed signal (Input)
Power switch ON (ACC or IG) and turn the wheel slowly
Pulse generation
(See waveform 1)
CHECK E/G (A-11) - Body ground
V - Body ground
MIL signal
Power switch ON (ACC or IG) and MIL ON
Below 1 V
Power switch ON (ACC or IG) and MIL OFF
10 to 14 V
TURN L (A-12) - Body ground
L - Body ground
Turn signal left
Turn signal LH indicator light OFF
Below 1 V
Turn signal LH indicator light ON
10 to 14 V
TURN R (A-15) - Body ground
LG - Body ground
Turn signal right
Turn signal RH indicator light ON
Below 1 V
Turn signal RH indicator light OFF
10 to 14 V
BACK-UP LP (A-16) - Body ground
G - Body ground
BACK-UP light signal
Power switch ON (ACC or IG) and shift is except R position
Below 1 V
Power switch ON (ACC or IG) and shift is R position
10 to 14 V
AIRBAG (A-17) - Body ground
R - Body ground
AIRBAG signal
AIRBAG indicator light ON
Below 1 V
AIRBAG indicator light OFF
8 to 14 V
TR (B-2) - Body ground
R - Body ground
Rheostat (light control) signal
Light control dimmer switch is TAIL / HEAD
Below 1 V
Light control dimmer switch is OFF
10 to 14 V
P-BELT SW (B-4) - Body ground
R - Body ground
Passenger seat belt condition
P-BELT indicator light ON
Below 1 V
P-BELT indicator light OFF
10 to 14 V
AUTO LVL (B-5) - Body ground
P - Body ground
Headlight automatic leveling signal
Headlight leveling system is normal
Below 1 V
Headlight leveling system is malfunctioning
10 to 14 V
TEMP SSR- (B-8) - Body ground
R - Body ground
Outside temperature signal
Always
4 to 5.5 V
+B (B-9) - Body ground
L - Body ground
Power switch signal
Always
10 to 14 V
TEMP SSR+ (B-12) - Body ground
R - Body ground
GND
Always
Below 1 Ω
IG2 (B-13) - Body ground
Y - Body ground
Power switch signal
Power switch ON (IG)
10 to 14 V
Power switch OFF
Below 1 V
FUEL IN (B-14) - Body ground
G - Body ground
Fuel signal
Power switch ON (ACC or IG) and fuel level is FULL
4.0 Ω
Power switch ON (ACC or IG) and fuel level is EMPTY
110 Ω
FUEL EARTH (B-15) - Body ground
R - Body ground
GND for fuel sender gauge
Always
Below 1 Ω
4P OUT (B-16) - Body ground
W - Body ground
Tachometer signal (Output)
Power switch ON (ACC or IG) and turn the wheel slowly
Pulse generation
(See waveform 2)
TC (B-17) - Body ground
B - Body ground
Taillight cancel (light condition) signal
Power switch ON (ACC or IG)
Pulse generation
(See waveform 3)


    A005135E24
  1. Using an oscilloscope, check the signal waveform 1 of the meter.
    Waveform 1 (Reference) 
    Item
    Contents
    Symbol (Terminal No.)
    SPEED IN (A-9) - Body ground
    Tool setting
    5 V/DIV., 20 msec./DIV.
    Vehicle condition
    Driving at approx. 20 km/h (12 mph)

    HINT:
    As vehicle speed increases, the wavelength shortens.



  2. A005138E17
  3. Using an oscilloscope, check the signal waveform 2 of the meter.
    Waveform 2 (Reference) 
    Item
    Contents
    Symbol (Terminal No.)
    4P OUT (B-14) - Body ground
    Tool setting
    5 V/DIV., 10 msec./DIV.
    Vehicle condition
    Engine idle speed

    HINT:
    As vehicle speed increases, the wavelength shortens.



  4. E065322E02
  5. Using an oscilloscope, check the signal waveform 3 of the meter.
    Waveform 3 (Reference) 
    Item
    Contents
    Symbol (Terminal No.)
    TC (B-15) - Body ground
    Tool setting
    2 V/DIV., 1 msec./DIV.
    Vehicle condition
    Power switch ON (IG)

    HINT:
    Waveform changes as illumination dims ("A" becomes longer).


COMBINATION METER INNER CIRCUIT

I102548E01


I102523E01


Table of Terminal Connection 
Terminal No.
Wire Harness Side
C10
1
ODO / TRIP Switch
2
3
4
IGN fuse
5
-
6
Front seat inner belt LH
7
Center airbag sensor
8
Body ECU
9
Skid control ECU
10
Headlight beam level control ECU
11
Center airbag sensor
12
Fuel sender gauge
13
4 Pulse output
14
Body ground
15
Fuel sender gauge
16
-
17
18
Flasher relay
19
20
Fuel sender gauge
21
DOME fuse
22
GAUGE fuse
23
Back-up light relay
24
Certification ECU
25
Power source control ECU
26
ECM
27
-
28
Light control rheostat
29
PANEL fuse
30
Passenger seat belt warning light
31
Fuel sender gauge
32
-