SERVICE PLUG GRIP > REMOVAL |
| 1. PRECAUTION |
| 2. REMOVE REAR NO. 2 FLOOR BOARD |
![]() |
As shown in the illustration, turn the knob to release the lock.
Remove the rear floor board No. 2.
| 3. REMOVE REAR DECK FLOOR BOX |
![]() |
Remove the deck floor box rear shown in the illustration.
| 4. REMOVE REAR NO. 3 FLOOR BOARD |
![]() |
Remove the rear floor board shown in the illustration.
| 5. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
![]() |
Disconnect the cable from the negative terminal of the 12 V auxiliary battery.
| 6. REMOVE SERVICE PLUG GRIP |
![]() |
Slide up the lever of the service plug grip. Remove the service plug grip while turning the lever to the left.
Insulate the service plug with insulating tape.
| 7. REMOVE BATTERY POSITIVE TERMINAL |
![]() |
Remove the 2 joints shown in the illustration, then remove the service plug grip cover.
![]() |
Remove the 2 bolts and electric vehicle fuse.