Home › ENGINE › 1NZ-FXE ENGINE CONTROL SYSTEM › MASS AIR FLOW METER

MASS AIR FLOW METER > INSTALLATION

for Preparation Click here



1. INSTALL MASS AIR FLOW METER


A087413E01
  1. Install a new O-ring to the MAF meter.

  1. Install the MAF meter with the 2 screws.

  1. Connect the MAF meter connector.



2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL


3. INSTALL RADIATOR SUPPORT OPENING COVER


    A087414E01
  1. Install the cover with the 6 clips.



4. PERFORM INITIALIZATION
  1. Perform initialization (Click here).

    NOTICE:
    Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.