Home › ENGINE › 1NZ-FXE ENGINE CONTROL SYSTEM › MASS AIR FLOW METER

MASS AIR FLOW METER > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.



2. REMOVE RADIATOR SUPPORT OPENING COVER


A087414E01
  1. Remove the 6 clips and radiator support opening cover.



3. REMOVE MASS AIR FLOW METER


A087413E01
  1. Disconnect the MAF meter connector.

  1. Remove the 2 screws and MAF meter.