TRANSMITTER BATTERY > REMOVAL |
| 1. REMOVE TRANSMITTER BATTERY |
![]() |
Push and hold the release knob in the direction indicated by the arrow in the illustration. Take the emergency key out of the case.
![]() |
Push and hold the release knob in the direction indicated by the arrow labeled A. Push out the side cover in the direction indicated by the arrow labeled B and remove the side cover.
![]() |
Remove the 4 screws and cover, as shown in the illustration.
![]() |
Remove the transmitter's battery (lithium battery: CR1632) from the transmitter, as shown in the illustration.