Home › ENGINE › 1NZ-FXE LUBRICATION › OIL PUMP

OIL PUMP > REPLACEMENT

for Preparation Click here



1. REPLACE OIL PUMP OIL SEAL


    A092512E02
  1. Using a screwdriver with its tip wrapped in tape, remove the oil seal.



    A118474E01
  1. Using SST, uniformly tap in a new oil seal until its surface is flush with the oil pump edge.

    SST
    09950-60010   (09951-00250, 09951-00380, 09952-06010)
    09950-70010   (09951-07100)

    NOTICE:
    Be careful not to tap the oil seal at an angle.

  1. Apply a light coat of No. 2 multipurpose grease to the lip of the oil seal.

    NOTICE:
    Keep the lip free of foreign objects.