OIL PUMP > INSPECTION |
| 1. INSPECT OIL PUMP RELIEF VALVE |
![]() |
Apply engine oil to the oil pump relief valve. Check that the valve falls smoothly into the valve hole of the oil pump body by its own weight.
| 2. INSTALL OIL PUMP ASSEMBLY |
Check the operation.
Apply engine oil to the drive and driven rotors. Install the rotors to the oil pump body, then check that the rotors revolve smoothly.
![]() |
Inspect the tip clearance.
Using a feeler gauge, measure the clearance between the drive and driven rotor tips.
![]() |
Inspect the body clearance.
Using a feeler gauge, measure the clearance between the driven rotor and oil pump body.