Home › ENGINE › 1NZ-FXE LUBRICATION › OIL PUMP

OIL PUMP > REASSEMBLY

for Preparation Click here



1. INSTALL OIL PUMP RELIEF VALVE


A089057E01
  1. Apply engine oil to the oil pump relief valve.

  1. Install the oil pump relief valve and oil pump relief valve spring to the oil pump cover.

  1. Install the oil pump relief valve plug.

    Torque:
    25 N*m{ 255 kgf*cm , 18 ft.*lbf }



2. INSTALL OIL PUMP ROTOR SET


B009333E01
  1. Apply engine oil to the drive and driven rotors.

  1. Install the rotors to the oil pump body with the marks facing upward.



    B009328E01
  1. Install the oil pump cover with the 2 bolts and 3 screws.

    Torque:
    8.8 N*m{ 90 kgf*cm , 78 in.*lbf } for bolt
    10 N*m{ 102 kgf*cm , 7 ft.*lbf } for screw