Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › BLOWER UNIT

BLOWER UNIT > REASSEMBLY

for Preparation Click here



1. INSTALL CLEAN AIR FILTER


    I038848E02
  1. Install the clean air filter to the air filter cover plate.

  1. Attach the 2 claws to install the air filter cover.



2. INSTALL BLOWER WITH FAN MOTOR SUB-ASSEMBLY


    I038846E01
  1. Install the blower with fan motor with the 3 screws.



3. INSTALL NO. 2 COOLER WIRING HARNESS SUB-ASSEMBLY


    I038847E01
  1. Install the No. 2 cooler wiring harness to the blower with fan motor.



    I038845E01
  1. Install the blower motor cover with the 5 screws.



4. INSTALL BLOWER MOTOR CONTROL


    I038844E01
  1. Install the blower motor control with the 2 screws.

  1. Connect the connector.



5. INSTALL AIR INLET SERVO MOTOR


    I038843E01
  1. Install the air inlet servo motor with the 3 screws.