Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › CONDENSER

CONDENSER > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT COOLER CONDENSER CORE
  1. If the fins of the condenser (with receiver) are dirty, clean them with water and dry them with compressed air.

    NOTICE:
    Do not damage the fins of the cooler condenser core.

  1. If the fins of the condenser (with receiver) are bent, straighten them using a screwdriver or pliers.



2. INSPECT LEAKAGE OF REFRIGERANT
  1. Using a halogen leak detector, check the pipe joints for gas leakage.

  1. Check the tightening torque of the joint if gas leakage is detected in a pipe joint.