Home › BODY ELECTRICAL › LIGHTING › LIGHTING SYSTEM

LIGHTING SYSTEM > CUSTOMIZE PARAMETERS

for Preparation Click here


HINT:
The following items can be customized.

NOTICE:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Be sure to make a note of the current settings before customizing.
  3. When troubleshooting a function, first make sure that the function is set to the default setting.


Illuminated entry 
Display (Item)
Default
Contents
Setting
Lighting Time
15 s
Changes lighting time after closing doors (light quickly fades out when power switch is turned ON (IG)
7.5 s / 15 s / 30 s
Battery Saver
ON
Illumination AUTO OFF ON function to turn off interior light automatically after specified time for prevent the battery loss when the interior light switch is "DOOR" position and the door is open
ON / OFF
I/L ON W/Unlock
ON
Function to light interior light, etc. when the door is unlocked with a transmitter, door key or door lock control switch
ON / OFF
I/L when ACC OFF
ON
Illuminates interior light when power switch is turned from the ON (ACC) to ON (IG) position
ON / OFF

Light control 
Display (Item)
Default
Contents
Setting
Sensitivity
NORMAL
To adjust sensitivity of lighting illumination. Refer to the illustration*1.
LIGHT2 / LIGHT1 / NORMAL / DARK1 / DARK2
Disp Ex ON Sen
NORMAL
Changes brightness when lowering lights such as combination meter indicator light, A/C indicator light, and clock light. Refer to the illustration*2.
LIGHT2 / LIGHT1 / NORMAL / DARK1 / DARK2
Disp Ex OFF Sen
NORMAL
Changes brightness when lowering lights such as combination meter indicator light, A/C indicator light, and clock. Refer to the illustration*3.
LIGHT2 / LIGHT1 / NORMAL / DARK1 / DARK2
DRL Function (●)
ON
ON / OFF of DRL function
ON / OFF
●: w/ Daytime running light

Illustration of *1 
Brightness of lowering the lights
Dark ←→ Bright
Setting
DARK2 - DARK1 - NORMAL - LIGHT1 - LIGHT2

Illustration of *2 
Brightness when canceling the lowering of the lights
Dark ←→ Bright
Setting
DARK2 - DARK1 - NORMAL - LIGHT1 - LIGHT2

Illustration of *3 
Lighting brightness
Dark ←→ Bright
Setting
DARK2 - DARK1 - NORMAL - LIGHT1 - LIGHT2