Home › STEERING › POWER STEERING › ELECTRONIC POWER STEERING SYSTEM

DTC    C1531    ECU Malfunction

DTC    C1532    ECU Malfunction

DTC    C1533    ECU Malfunction

DTC    C1534    ECU Malfunction

for Preparation Click here


DESCRIPTION

Fail-safe function operates to stop power assist while DTCs indicating ECU malfunctions are output. However, power assist continues when DTC C1534 is output because it indicates an EEPROM error in the ECU.

DTC No.
DTC Detection Condition
Trouble Area
C1531
ECU internal malfunction (CPU malfunction) is detected.
Power steering ECU
C1532
ECU internal malfunction (Peripheral circuit malfunction) is detected.
Power steering ECU
C1533
ECU internal malfunction (Substrate temp. sensor malfunction) is detected.
Power steering ECU
C1534
ECU internal malfunction (EEPROM error) is detected.
Power steering ECU

INSPECTION PROCEDURE

1.RECONFIRM DTC
  1. Check for DTCs.

    OK:
    DTCs other than C1531, C1532, C1533 and C1534 are not output.



NG
REPAIR CIRCUIT INDICATED BY OUTPUT CODE
OK

REPLACE POWER STEERING ECU