Home › STEERING › POWER STEERING › ELECTRONIC POWER STEERING SYSTEM

DTC    U0073    Control Module Communication Bus OFF

DTC    U0121    Lost Communication with Anti-lock Brake System (ABS) Control Module

for Preparation Click here


DESCRIPTION

The power steering ECU receives signals from the skid control ECU (ECB ECU) via CAN communication.

DTC No.
DTC Detection Condition
Trouble Area
U0073
CAN communication error (CAN bus is off)
CAN communication system
U0121
Skid control ECU communication error
  1. CAN communication system
  2. Skid control ECU (when only U0121 is output)

HINT:
When 2 or more DTCs starting with [U] are output simultaneously, inspect the connectors and wire harness of each ECU.


WIRING DIAGRAM


F100827E04


INSPECTION PROCEDURE

1.CHECK DTC
  1. Using the Techstream (with CAN VIM), check for DTCs.

    OK:
    DTC is not output.



OK
PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE
NG

GO TO CAN COMMUNICATION SYSTEM TROUBLESHOOTING