Home › HYBRID SYSTEM › HYBRID TRANSMISSION / TRANSAXLE › ELECTRONIC SHIFT LEVER SYSTEM

ELECTRONIC SHIFT LEVER SYSTEM > PRECAUTION

for Preparation Click here



1.NOTICE FOR INITIALIZATION
When the cable of the negative (-) battery terminal is disconnected, initialize the following systems after the cable is reconnected.

System Name
See procedure
Power Window Control System
Click here

2.NOTICE FOR HYBRID SYSTEM ACTIVATION
  1. When the warning light is illuminated or the battery has been disconnected and reconnected, pressing the power switch may not start the system on the first try. If so, press the power switch again.
  2. With the power switch's power mode changed to ON (IG), disconnect the battery. If the key is not in the key slot during reconnection, DTC B2799 may be output.