Home › HYBRID SYSTEM › HYBRID TRANSMISSION / TRANSAXLE › ELECTRONIC SHIFT LEVER SYSTEM

ELECTRONIC SHIFT LEVER SYSTEM > FAIL-SAFE CHART

for Preparation Click here


If the transmission control ECU detects a malfunction, the fail-safe functions shown in the table below are activated.

DTC No.
Fail-safe Function
Problem Symptoms
C2300
C2301
Only the P position release operation is possible and the shift control actuator is activated.
  1. The shift position is not indicated on the meter.
  2. Although the shift position is indicated on the meter, the vehicle cannot be driven.
C2303
-
The battery is dead.
C2304
C2305
C2306
The transaxle parking lock control relay is turned off.
The parking lock mechanism cannot be switched.
C2307
The transaxle parking lock control relay is turned off.
  1. The shift position is not indicated on the meter.
  2. Although the shift position is indicated on the meter, the vehicle cannot be driven.
C2311
-
The parking lock mechanism cannot be switched.
C2312
-
The hybrid system does not start up.
C2318
-
The parking lock mechanism cannot be switched on a hill.