Tester Display
| Measurement Item
| Reference Value
|
Shift Pos Display (P)
| Shift position display (P)
| ON or OFF
|
Shift Pos Display (Not P)
| Shift position display (not P)
| ON or OFF
|
Master Caution Display
| Master caution display
| DISP or NONDISP
|
PSW Indicator Mode
| PSW indicator mode
| OFF, ON, FAST, or SLOW
|
U Phase Voltage Value
| U phase voltage value
| min: 0 V, max: 20 V
|
V Phase Voltage Value
| V phase voltage value
| min: 0 V, max: 20 V
|
W Phase Voltage Value
| W phase voltage value
| min: 0 V, max: 20 V
|
Battery Voltage Value
| BATT voltage value
| min: 0 V, max: 20 V
|
IG(+B) Voltage Value
| IG (+B) voltage value
| min: 0 V, max: 20 V
|
P Sply OFF Prepare Rqst Sig
| Power supply off preparation request signal
| ON or OFF
|
Cmplte of Learn Lck Pos
| Completion of learning lock position
| OK or NG
|
Cmplte of Learn Unlck Pos
| Completion of learning unlock position
| OK or NG
|
# of Trip Cuntr after Learn
| Number of trip counter after learning
| min: 0, max: 65535
|
Main Relay for Motor Drive
| Main relay for motor drive
| ON or OFF
|
Sig of Electric Key Cond
| Signal of electrical key condition
| ON or OFF
|
U Phase Crnt-Carry Status
| U phase current-carrying status
| ON or OFF
|
V Phase Crnt-Carry Status
| V phase current-carrying status
| ON or OFF
|
W Phase Crnt-Carry Status
| W phase current-carrying status
| ON or OFF
|
U Phase Voltage Status
| U phase voltage status
| ON or OFF
|
V Phase Voltage Status
| V phase voltage status
| ON or OFF
|
W Phase Voltage Status
| W phase voltage status
| ON or OFF
|
Battery Voltage Status
| BATT voltage status
| ON or OFF
|
IG (+B) Phase Voltage Status
| IG (+B) phase voltage status
| ON or OFF
|
ACC Condition Signal
| ACC condition signal
| ON or OFF
|
Init Drv Cntrl Completed
| Initial drive control completed
| OK or NG
|
Cmplte of Detect Lck Pos
| Completion of detecting lock position
| OK or NG
|
Cmplte of Detect Unlck Pos
| Completion of detecting unlock position
| OK or NG
|
P/Not P Move Shft Range
| P/Not P movable shift range
| SET or UNSET
|
Main Relay
| Main relay
| NORMAL or ABNOML
|
Vehicle Condition
| Vehicle condition
| STOP or MOVE
|
Fail Rank
| Fail rank
| min: 0, max: 255
|
Type of ECU
| Type of ECU
| min: 0, max: 65535
|
Detail Information 1
| Detailed information 1
| Failure information is displayed in hexadecimal
|
Detail Information 2
| Detailed information 2
| Failure information is displayed in hexadecimal
|
Detail Information 3
| Detailed information 3
| Failure information is displayed in hexadecimal
|