Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › AIR CONDITIONING SYSTEM

AIR CONDITIONING SYSTEM > DTC CHECK / CLEAR

for Preparation Click here



CHECK DTC
  1. Connect Techstream to the DLC3.

  2. Turn the power switch ON (IG) and turn Techstream ON.

  3. Read the DTC by following the prompts on the tester screen.

    HINT:
    Refer to Techstream operator's manual for further details.


CLEAR DTC
  1. Connect Techstream to the DLC3.

  2. Turn the power switch ON (IG) and turn Techstream ON.

  3. Clear the DTC by following the prompts on the tester screen.

    HINT:
    Refer to Techstream operator's manual for further details.