Home › BODY ELECTRICAL › NAVIGATION › NAVIGATION SYSTEM

NAVIGATION SYSTEM > Map Disc cannot be Ejected

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK MULTI-DISPLAY
  1. Turn the power switch ON (ACC).

  1. Keep pressing the MAP eject switch for 5 seconds and check if the disc is ejected by forced ejection.

    OK:
    The disc is ejected.



NG
PROCEED TO NEXT INSPECTION PROCEDURE SHOWN IN PROBLEM SYMPTOMS TABLE
OK


2.CHECK MAP DISC


    I100152
  1. Check that the map disc is not deformed or cracked.

    OK:
    No deformations or cracks on the map disc.



NG
REPLACE MAP DISC
OK

END