REAR SHOCK ABSORBER WITH COIL SPRING > REASSEMBLY |
| 1. INSTALL REAR SHOCK ABSORBER ASSEMBLY LH |
![]() |
Using SST, compress the coil spring.
![]() |
Fit the coil spring end into the recessed part of the shock absorber assembly lower seat.
Fit the rear coil spring insulator upper to the rear spring front bracket.
![]() |
Install the rear No. 1 spring bumper, rear suspension support, rear spring front bracket, No. 1 cushion and No. 1 cushion washer.
![]() |
Use a 6 mm socket hexagon wrench to fix the shock absorber piston rod and tighten the nut.
Release SST and remove it from the coil spring.