Home › SUSPENSION & AXLE › SUSPENSION › REAR STABILIZER BAR

REAR STABILIZER BAR > INSTALLATION

for Preparation Click here



1. INSTALL REAR STABILIZER BAR


    G027359E01
  1. Install the stabilizer bar so that the mark position faces towards the vehicle's rear right. Hold the bolts and tighten the nuts.

    Torque:
    149 N*m{ 1,520 kgf*cm , 110 ft.*lbf }



2. INSTALL REAR AXLE BEAM DAMPER


    G027355E01
  1. Install the rear axle beam damper to the center of the rear axle beam.