Home › BRAKE › BRAKE CONTROL › FRONT SPEED SENSOR

FRONT SPEED SENSOR > REMOVAL

for Preparation Click here



1. REMOVE FRONT WHEEL


2. REMOVE FRONT FENDER LINER


3. REMOVE FRONT SPEED SENSOR


    F046175E01
  1. Disconnect the sensor connector.



    F046179E02
  1. Remove the 2 bolts (A and B) and 2 sensor clamps from the body and front shock absorber.

    HINT:
    The bolt B is tightened together with the brake flexible hose clamp.



    F047471E01
  1. Remove the clip from the front shock absorber.

  1. Remove the bolt and sensor.

    NOTICE:
    Do not allow foreign matter to attach to the tip or connecting portion of the speed sensor.