BRAKE PEDAL STROKE SENSOR > REMOVAL |
| 1. REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY |
![]() |
Detach the 2 claws and 4 clips, and remove the instrument panel register.
| 2. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY |
![]() |
Remove the 2 screws.
Disconnect the hood lock control cable.
Detach the 4 claws and 5 clips.
Disconnect all connectors and remove the instrument panel finish panel.
| 3. REMOVE BRAKE PEDAL STROKE SENSOR ASSEMBLY |
Disconnect the sensor connector.
![]() |
Remove the 2 bolts and sensor.