YAW RATE AND DECELERATION SENSOR > REMOVAL |
| 1. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY |
![]() |
Pull the console panel sub-assembly upper upwards and disengage the 2 claws.
Detach the 4 clips and remove the console panel.
![]() |
Remove the 4 screws and instrument panel cup holder.
| 2. REMOVE CONSOLE BOX POCKET |
| 3. REMOVE CONSOLE BOX CARPET |
| 4. REMOVE REAR CONSOLE BOX SUB-ASSEMBLY |
![]() |
Remove the 2 screws, 2 bolts and console box.
| 5. REMOVE YAW RATE SENSOR |
![]() |
Disconnect the connector and remove the 2 bolts and sensor.