Home › BODY ELECTRICAL › DOOR LOCK › ELECTRICAL KEY ANTENNA

ELECTRICAL KEY ANTENNA > INSPECTION

for Preparation Click here



1. INSPECT ELECTRICAL KEY ANTENNA


E067622E01
  1. Measure the resistance of the outside door handle.

    Standard resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    1 - 3
    Switch pushed
    Below 1 Ω
    1 - 3
    Switch not pushed
    10 kΩ or higher

    1. If the result is not as specified, replace the outside door handle.



2. INSPECT ELECTRICAL KEY ANTENNA (LUGGAGE)


B050965E01
  1. Measure the resistance of the antenna.

    Standard resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    Back door lock switch touched
    Below 1 Ω

    1. If the result is not as specified, replace the electrical key antenna (luggage).